How to use coating glue and matters needing attention
Release time:
2021-10-21
The covering glue is a benzene-free and aldehyde-free dark black colloid, curing at room temperature, high peel strength and low cost. Uses: suitable for particleboard, MDF board, or gypsum board PVC, or paper veneer.
The covering glue is a benzene-free and aldehyde-free dark black colloid, curing at room temperature, high peel strength and low cost. Uses: suitable for particleboard, MDF board, or gypsum board PVC, or paper veneer.
How to use coating glue
1. Under normal circumstances, PVC wood grain film can be glued on one side, and it can be rolled or scraped.
2. The glue must be evenly applied and the thickness must be consistent to ensure that there is no lack of glue and no glue accumulation. The thickness of the glue can be adjusted appropriately according to the thickness of the film and the weather.
3. It is recommended that the filming time after gluing be shorter in dry and high temperature summer or autumn, and longer in wet and low temperature spring and winter. Touch the glued surface with your fingers to feel quick-drying and sticky hands once. It is suitable for positive static pressure fit. The specific time can only be determined by the customer according to the thickness of the glue, the speed of the strip and the level of related materials and the ambient temperature.
Adhesive manufacturer: Matters needing attention for coating adhesive
1. The effective room temperature sealed shelf life of this product is one year.
2. The unused glue must be sealed and sealed to prevent the volatilization of the solvent and the action of air from thickening and aging the glue and affecting the quality of the product. The glue that has been opened should generally be used up within 10 days.
3. When encountering materials that are particularly difficult to bond, the substrate can be surface treated (using our company's treatment agent, without affecting the quality), and then bonding can achieve the desired effect.
4. Keep away from the fire source and keep the production site clean and ventilated.
5. Do not peel off immediately after bonding, so the adhesive layer is not fully cured, and the strength is not reflected. After 24 hours or longer, the adhesive layer can be completely cured. At this time, peeling can damage the substrate. The details vary depending on the weather and material.
Related news
Changzhou Zhenghe Fine Chemical Co., Ltd.
Address: Luoyang Town Industrial Development Zone, Changzhou City, Jiangsu Province
Phone: 0519-88550566
Fax: 0519-88550166
E-mail: 1007559360@qq.com
Changzhou Zhenghe Fine Chemical Co., Ltd.
Address: No. 16-15, Changjiang Plastics Market, Jiangsu
Phone: 0519-85766615
Fax: 0519-85766515
Mobile phone: 13806125733
Email: 1914253742@qq.com
www.300.cn Changzhou | Tags |